A dry, high-altitude climate does something particular to a construction site: wind carries dirt, dust, and storm debris across every finished surface until the build is coated in it. Layer that Front Range grime on the residue a project leaves behind, the dust film, the splatter, the adhesive, the scuffing, and a brand-new commercial property looks anything but new when it is time to hand it over.
We handle the exterior and site cleanup that gets a completed commercial build clean, presentable, and ready for handover. Our self-contained trucks bring their own water and power, our pressure is fully customizable and non-destructive, and we can reclaim our own water on site wherever runoff has to be captured. That is the kind of final clean Platinum Pressure Washing was built to deliver.
When your build is ready for its last step, call us at (303) 931-7300 and we will scope the job with you.
Our post-construction cleanup adapts to the kind of build you have, from a single finished structure to a full site, and here is how we handle each one.
Once a commercial build wraps, the finished exterior and surrounding hardscape still carry what the project left behind: dust film, splatter, adhesive residue, and scuffing. We clean those surfaces with customizable, non-destructive pressure so nothing gets damaged on the way to a clean handover. Around here a new building ends up coated in wind-driven dust and site debris, so this is a dry-climate cleanup that lifts grime and residue off new finishes.
Newly built warehouse and industrial shells come with large footprints, and we cover them efficiently with self-contained trucks and multiple machines at once. We clean the exterior surfaces, aprons, loading areas, and surrounding flatwork, and where a site requires runoff capture we bring extraction and water reclamation to the job.
Sometimes the structure is done but the site still carries construction grime, and that is its own job. We clean the walkways, drives, entry areas, and hardscape around the new structure with the same standardized, eco-friendly process, property protection in place, and before and after documentation on the work.
A general contractor or developer picks a cleanup crew for the final step because the details matter and the timeline is tight. Here is what we bring to that last clean.

A just-finished commercial site often has no working water spigot and no reliable power yet, which stalls a lot of crews. Ours carry their own onboard water and generate their own power, so we can clean a site that is not hooked up and you do not have to wait on utilities to schedule the final clean.

Some commercial sites require the wash water to be captured rather than left to run off, and that requirement rules out a lot of crews. Because we can reclaim our own water on site, we clean compliance-sensitive builds with confidence and keep your project moving instead of waiting on a specialist.

A new build has finished, expensive exterior surfaces you cannot afford to mar on the last clean. Our pressure is fully customizable and non-destructive, low enough that you could hold your hand in front of the wand, so we lift construction grime off delicate finishes and leave the surfaces underneath untouched.

Cured splatter, adhesive, and gum-like residue can hold on tight after a build, and pressure and product alone will not always shift them. One of our machines turns water into steam for exactly those jobs, giving us a way to tackle residue that ordinary pressure washers cannot touch.
You reach out, whether you are the general contractor, the developer, or the property manager, and we scope the job with you by phone first. For accuracy on a commercial site we follow up with a thorough on-site walkthrough: which surfaces and site areas need cleaning, the state of the build, what water and power are available, how we will access the site, and whether runoff has to be captured. From there we give you a scope-based written estimate, adjusted for the real job factors like no water on site, off-hours work, access, and any complications.
We book the clean around your construction schedule and your handover date, and that includes after-hours or overnight work when the site or the timeline calls for it. Before anything starts we confirm the scope and site access with whoever is in charge on the ground.
We protect the property and prep the area, then either hook to on-site water or run off our self-contained trucks where there is no usable hookup yet. If the site requires runoff capture, we set up extraction and water reclamation before we begin. Then we make the active site safe: the three-foot “Caution: Pressure Washing” sign goes up, vehicles get coned off, and we tape and direct as needed while our customizable-pressure machines come online.
We work the exterior and site surfaces with customizable, non-destructive pressure and eco-friendly product, running multiple machines to cover large footprints, and we bring steam to bear on stubborn construction residue where it is needed. We take in the surrounding hardscape as we go, so no construction grime or runoff is left behind on the property.
We document the before and after with photos and walk the finished site with you or your site contact. The invoice only follows once you are satisfied with the work, because getting it right is the whole point of the final clean.
We stand behind every job with a satisfaction guarantee. If you're not happy, we'll come back as many times as it takes to make it right, because the customer is number one. On a live construction site, that promise is what lets you hand the final clean to us and know it will be done to your standard.
We carry insurance and back our work, so your property is protected while we're on the job. On an active build with finished surfaces and equipment all around, that coverage keeps the last step of the project worry-free.
We can capture it. On sites that require runoff to be contained rather than left to drain, our trucks run an extraction setup and reclaim our own water right on the property. On sites without that requirement, we clean with eco-friendly product and customizable low pressure and include the surrounding site, so grime and runoff are not left behind either way. That capture capability is what lets us clean compliance-sensitive builds that other crews cannot take on.
Yes. Your build timeline sets ours, and we work business hours, after hours, or overnight to fit the window you have before handover. Whatever slot the site allows, we plan the clean around it so the schedule stays on track.
It depends on the size and state of the build, and larger commercial sites are commonly multi-day jobs. We give you a scope-based estimate after the walkthrough that covers the expected timeline along with the work itself. Because both the timeline and the cost depend on scope, the walkthrough is how we get the numbers right before any work begins.
When your Denver commercial build is finished and the site needs to be handover-ready, we will give you a free, scope-based estimate off a walkthrough, no obligation. Bring us in for the final clean and we will get the property looking the way it should before you turn it over. Call (303) 931-7300 to set up your walkthrough.