Out here on the Front Range, the grime that dulls your concrete isn’t the algae or organic growth coastal homes fight. It’s fine, wind-driven dirt, dust, and storm debris that settles in and gets ground into the surface season after season. Left alone, that build-up leaves driveways, patios, and walkways looking flat and tired.
We clean residential concrete flatwork of every kind with eco-friendly product and fully customizable pressure, pulling the ground-in grime back out and restoring the finish. At Platinum Pressure Washing, we’ve earned the trust of homeowners across the area handling exactly this kind of build-up without harsh chemicals or guesswork.
If your concrete has gone dull, we’re glad to take a look and talk through what it needs. Call us at (303) 931-7300 for a quote.
The same eco-friendly, customizable-pressure process adapts to each concrete surface we clean, from broad poured slabs to delicate natural stone, with the pressure set to match what each one can safely take.
This is the standard flatwork most homes have: driveways, walkways, patios, and porches. We apply eco-friendly product, let it dwell, then rinse the surface clean, working a deck brush into stubborn spots and ground-in grime. Poured slabs are where the fine wind-driven dust and storm debris tend to settle deepest over the seasons here.
Stamped surfaces get cleaned with customizable, non-destructive pressure so the decorative pattern and any sealer or color stay protected. The product lifts dirt out of the stamped texture and the grout lines where grit collects, with no blasting that would etch or dull the finish.
On pavers, product and a controlled rinse clean the faces and lift dirt from the joints. We keep the pressure low enough to leave the joint sand in place, and a deck brush takes care of any set-in spots by hand.
Natural stone is handled gently, with customizable low pressure and eco-friendly product only, because stone varies so much in hardness and porosity. The process cleans the surface thoroughly while keeping it smooth and unmarked.
There’s more to a good concrete clean than pointing a wand at it. Here’s what makes the difference on our jobs.
Our pressure adjusts to the surface rather than running at one blunt setting. That control is what lets us clean stamped concrete, pavers, and natural stone safely, matching the force to the finish instead of putting every surface through the same heavy blast.
Concrete flatwork sits right next to lawns, flower beds, and the spots where kids and pets play. We clean with eco-friendly product and no bleach, so your landscaping stays healthy and your family can come and go freely while we work.
We clean the entire flatwork area and manage the rinse so dirty runoff isn’t left behind on the rest of your concrete. The whole surface comes out uniformly clean, edge to edge, instead of bright in some spots and dingy in others.
For baked-on grease or the most stubborn set-in stains, we can bring steam capability most crews simply don’t carry. It’s an edge that comes from running some of the most advanced equipment in the state, and it’s what lets us take on the marks other washers give up on.
You call or request a quote, and we talk through the concrete itself: the surfaces you have, the size of the area, and any problem spots like oil or grease. We reassure you on pressure and safety up front. Pricing is scope-based off our standard tiers and confirmed with a walkthrough.
We get the job on the calendar around your schedule and confirm the details before the crew rolls out, so there are no surprises on the day.
On arrival the crew does a walkthrough, protects the surrounding area, checks water access, and confirms the scope with whoever’s in charge.
Eco-friendly product goes down on the concrete and is allowed to dwell so it can break down the embedded dirt. Then the surface is rinsed clean with fully customizable pressure set to match the flatwork we’re cleaning. On a typical job that means our pressure machines, a backpack sprayer for the product, and a deck brush close at hand.
Set-in grime, oil, and grease get worked over with a deck brush and repeat product applications, then re-rinsed. The worst areas get several careful passes so we lift as much as the surface will give up while keeping it protected.
We finish with a before-and-after walkthrough or sign-off to confirm you’re happy with the result, and the invoice only follows once the work is done right. You’re not billed until you’ve seen the finished surface.
Most residential concrete cleans fall between the standard tiers below, with the final price set by the size of the flatwork and how packed-in the dirt or staining is. A $300 job minimum applies.
Price can adjust up for scope factors like no water on site, off-hours work, longer travel, or heavy oil and grease that needs multiple passes to lift.
A preferred-customer discount is available for repeat customers and for bundling your concrete cleaning with another service, such as a house wash the same day, so it’s worth asking when you get your estimate. If a seasonal promotion is running, like a spring coupon, it may be applied too, so ask about current promotions when we scope the job.
Our work is backed by clear, no-nonsense promises, so you know where you stand before we ever start.
We stand behind every job with a satisfaction guarantee: if you're not happy, we'll come back as many times as it takes to make it right, because the customer is number one.
We carry insurance and back our work, so your property is protected while we're on the job.
We lift oil and grease as much as the surface will give up, with set-in stains lightening steadily across each pass. That approach protects the concrete while getting you the cleanest result the surface can hold.
No, because our pressure is fully customizable and we match it to the surface instead of blasting everything at one setting. Stamped patterns, sealers, and paver joint sand stay protected because we dial the pressure down and let the eco-friendly product do the work, and deck-brushing handles the tough spots instead of raising the pressure. It’s low enough that you could hold your hand in front of the wand, which is exactly why we can clean surfaces most crews wouldn’t dare pressure wash.
Most concrete in this area does well on an annual or semi-annual clean, which keeps it looking fresh year-round. Here the cleaning is really about clearing settled grit and keeping the finish sharp.
Not necessarily. With access to the area and a water source, we can complete the job whether or not you’re home. Where possible we arrange a before-and-after walkthrough or sign-off so you can confirm you’re happy with the result.
Your quote is free and comes with no obligation, and we set the price to the actual job so it fits your flatwork and nothing more. Whether it’s a single patio or the full run of flatwork around a Denver home, we’re ready to get your concrete looking fresh again. Call us at (303) 931-7300 to get started.
